TPS-1525 FPGA Mining Machine

---

•  FPGA -  XCVU9P-L2FSGD2104E (VCCINT operation voltage 0.698V~0.876V)
• Power & Thermal
  • Support 2 ATX PCIe Power Connector(4X2，4X2)，12V/300W Power Input 
    • No need power from PCIe slot or PCIe Riser Card 
  • Efficiently Power Source 
    • Special design VRM ( 8 Phases and powerful inductor) for FPGA VCCINT. 
    • VCCINT : 0.7~0.8V/210A, peak up to 240A. (Voltage auto range depend on current or Bitstream) 
    • MGT(GTH): 1.2V/19.2A + 0.9V/10.6A ( for 2 QSFP28 28Gbps and PCIe GEN3X16/GEN4X8) 
    • DDR4 : 1.2V/18A ·Others : 0.85V/4.5A，1.8V/7A，1.2V/2A 
  • 435W Air flow heat sinker for thermal control, and no need extra water cooling cost.  
    • Test under Whitefire 15GH/S 0xToken 
    • VU9P - 61。C@25 。C 
    • VRM - 63。C@25 。C 
    • PCBA - 43。C@25 。C 
• BMC (Board management controller) Xilinx Zynq Z-7020
  • Software/ Bitstream developer can control/adjust VRM/Power telemetry/ temperature special application. 
    • Detail software command spec please contact Talentpros System. 
• m-View  mining machine management system
  • There are 2 ways to link up with m-View 
    • Giga Ethernet 
    • USB2.0 port  
• m-View function 
  • Adjust VCCINT Core power voltage and monitor 
  • Power management /Over current protection and over temperature protection 
  • Upload Bitstream to FPGA chip 
  • Pool and Wallet Management
  • Remote  execute  Minging Program
  • Abnormal  Condition Handling
  • Remote Upgrade TPS1525 BOOT Loader
• Memory (Optional and default no install on board) dual-rank DDR4 interfaces
  • Support up to 4 16GB DDR4 DIMM 
    • 4x DDR4 16 GB, 2400(MT/s), 64-bit with error correcting code (ECC) DIMM 
• Bitstream Configuration
  • Support USB2.0 (A Type) to JTAG for download Bitstream file to FPGA XCUV9P
  • Support remote upload bitstream files to SD Card via Giga Ethernet
  • Support Micro SD Card to JTAG for download Bitstream file to FPGA XCUV9P
    • Support up to 8 Bitstream files on SD card
    • Support security function on SD card and binding to FPGA XCUV9P chip.
• Communication & Networking
  • Two QSFP 100G Interfaces 
    • Two QSFP connectors (8 GTY)
    • Two QSFP capable of data rates up to 28 Gb/s 
  • PCIe Gen3 x 16 or Gen4 x8 via Edge Connector (Add On Card Mode)
    • 16-lane PCI Express (16 GTY)
    • PCIe integrated Endpoint block connectivity 
    • Gen1, 2 or 3 x1/x2/x4/x8/x16
    • Gen4 x8 
  • PCIe Gen1 x 1 via USB3.0 port (Standalone Mode)
    • PCIe integrated Endpoint block connectivity 
    • Gen1 x 1  
• Compatible xCU1525 Platform
  • Supported with SDAccel Development Environment for OpenCL, C, C++ and RTL
  • xCU1525’s  Bitstream file can run well on TPS1525 as well. (Pin to pin Compatible) 

 Contact us : Sales@talentpros.com.tw