TPS-VU29P-IE+ High Performance FPGA Platform

---

System Application

• Gigabit Ethernet
  • Xilinx Vivado Tool Download FPGA Design File. (Include ILA)
  • TPS m-View management system for Self-Test and FPGA Peripheral Setting.
• USB2.0
  • Xilinx Vivado Tool Download FPGA Design File. (Include ILA)
  • TPS m-View management system for Self-Test and FPGA Peripheral Setting.

Features

Large Capacity & Scalable

• Up to 3780K System logic cells and 454.5Mb of internal memory(Block Ram and Ultra Ram).
• Small form factor. (285 × 175 mm)

Flexible & Powerful I/Os

• 616 HP I/O pins through 4 high-speed connectors (CON1~ CON 4). HP I/O voltage can be adjusted to 1V,1.2V, 1.35V, 1.5V or 1.8V through runtime software in GUI or change Configuration file in SD Card with 3 status LEDs on-board to indicate I/O voltage.
• 16 Gigabit transceivers and 11 HP I/O pins through a high-speed connector(CON GTY) can run up to 16Gbps(GTY), HP I/O voltage can be adjusted to 1V,1.2V, 1.35V, 1.5V or 1.8V through runtime software in GUI or change Configuration file in SD Card with 3 status LEDs on-board to indicate I/O voltage.
• Total I/O Pins = 627HP I/Os + 16 GTY.
• HP I/O Voltage Adjustment range: 1V ~ 1.85V, resolution: 50mV

Clock Sources Management

• 5 global clocks to be selected from 
  • 2 programmable clock generator for 5 global clocks. (10-650MHz, 4 different frequencies)
  • Clock frequency can be adjusted through runtime software in GUI or change Configuration file in SD Card.
• 2 GTY/Ref clocks to be selected from 
  • 1 programmable clock generatorfor 2 GTY reference clocks. (10-650MHz, 2 different frequencies)
  • Clock frequency can be adjusted through runtime software in GUI or change Configuration file in SD Card.

Power Management

• 5 Group HP IO Connectors Power Adjustable. (4* HP IO Connectors + others HP IOs for GTY Connectors)
• Every HP Connector provide adjusted voltage power supply. (Each Current Driver Capacity 10A)
• Independent provide VCC5V power supply for 5 IO Connectors shared. (Total Current Driver Capacity 20A)

High Performance

• Up to 150W of power for an FPGA.
• Equal trace length for I/Os from same I/O connector.
• Speed Grade (External Loopback, through the Loopback Card)
  • LVDS Component Mode Performance
    • HP IO Connectors
    • LVDS TX DDR 1200 Mbps.
    • LVDS RX DDR 1200 Mbps.
  • GTY Transceiver
    • (GTY Connector) 16 Gbps.

High Reliability

• Screw-lock design to I/O connectors.
• Self-Tests – Isolate design issues from board issues conveniently with a software GUI.(TPS m-View management system)
• Monitoring of on-board voltage, current and temperature with a software GUI.(TPS m-View management system)
• Automatic shut-down upon detection of over-current, over-voltage or over-temperature.

Ease-of-Use

• Auto diagnosis of TPSIC detect loopback card.
• Multiple FPGA configuration options through Ethernet port, USB port, JTAG and micro SD card.
• Support VU29P FPGA 4 input/4 output GPIO for GUI Control.
• Virtual SWs for simple tasks such as changing a setting or indicating a condition .